Tube End Plastic Forming Machinery. THIS PHI MODEL DF IS CAPABLE OF BEADING, SINGLE AND DOUBLE FLARING TUBING. THIS MACHINE DOES NOT USE ELECTRICAL POWER BUT IS POWERED BY PNEUMATICS. THE AIR POWER SPECIFICATION IS 75 TO 100 PSI. ...
Simply stated, vacuum forming is the process of taking a flat sheet of plastic and changing it into a contoured shape. This is accomplished by putting a piece of plastic into some type of clamping mechanism, heating the sheet up to a forming temperature, ...
<-------- Can Move Left or Right -------->
| Punching Frequency | 20-35time/min |
| Max.Forming Depth | 50mm |
| Max.Forming Area | 260*450mm² |
| Air-compressor | Less than 0.2m³/min |
| Pressure | 0.4-0.7MPa |
| Power | 20Kw |
| Overall Dimension | 4200*850*1700mm |
| Weight | 2000KG |
1) The stretching of plugs inside of the upper mould are controlled by air cylinder.
2) The sheet feeding is driven by pin chain. The pin chain is controlled by motor with inverter and the feeding length can be set through touch screen.
3) It adopts four pillars to fix the mould. We could adopt four pillars to fix the mould.
4) The up mould is fixed and the mould plate movement is driven by toggle cam system.
5) The temperature of each zone is controlled by Temperature control module.
6) The production process include sheet feeding, heating, plugs stretching, forming and in-mould cutting and blow final products out.
Simply stated, vacuum forming is the process of taking a flat sheet of plastic and changing it into a contoured shape. This is accomplished by putting a piece of plastic into some type of clamping mechanism, heating the sheet up to a forming temperature, ...